Bloomfield MO | Bern - 12/23/2024 16:05
What's wrong with your old one? If you have low oil pressure, the problem is very likely NOT the pump.
I’m doing an inframe and it’s gonna end up being a very extensive one. I’m gonna do a new oil cooler and thermostat as well. New injector pass throughs, radiator and new oil sump tube clamps(if I can find them and need a part number. To answer your original question, my oil pressure was good but the engine got a little warm and it’s the original oil pump. Knowing this I removed the pump and noticed some flaking on the drive and driven gears, within the pump.
 (IMG_5200 (full).jpeg)
 (IMG_5201 (full).jpeg)
Attachments
----------------
 IMG_5200 (full).jpeg (103KB - 4 downloads)
IMG_5201 (full).jpeg (126KB - 2 downloads)
|
N14 Celect oil pump replacement
