|
Cedar Rapids, Iowa | Buy the fiber and try it out. This is what I use:
https://www.amazon.com/YUTIANHOME-Armored-Outdoor-Compatible-Frictio...
The LC connectors are side-by-side, so you need a conduit big enough for them to go through side-by-side. I used 1" and it was easy. 3/4" PEX might work. 1/2" PEX would be too small.
I connected my pull tape to the fiber cable about 2 feet back from the end, then put a 3/4" heat shrink tube over the pulling tape and LC connectors. I didn't want to pull directly on the connectors, but they need to be with the pull tape so they wouldn't get caught on anything. | |
|
Conduit size ?
