|
| Currently have a 2015 CASE 240 and a 2015 JD DB44 planter. I am running a Reinhardt Green Fit system on the tractor (works fine) with a 2630 monitor as my guidance.
Problem: The planter will not populate up on the ISOBUS (Case 240) which has the 2630 monitor. However, when I plug the same planter into a JD tractor with a 2630 monitor, the planter populates up fine. I have swapped ISO plugs around on the Case tractor and still have the same problem. CAN Hi and CAN Low voltage are where they need to be.
Any suggestions on which direction to look? | |
|
ISOBUS problems
