AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Autosteer for a Challeger
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
c_mayer
Posted 12/13/2024 07:05 (#11007206 - in reply to #11006876)
Subject: RE: Autosteer for a Challeger


Jeffersonville, OH
ks8780 - 12/12/2024 22:23

965E that is auto guide ready.

What would be a decent, affordable system ?

Tillage, air drill, and scraper work. Grade control on scraper may be interesting but do not know anything about it.

I have an Envisio pro that I plant with inbone tractor and a CFX-750 in the air drill tractor. All on waas.

I think that grade control would need something with some activations and maybe some type of base station. I really don't know.

What are some suggestions ?


Affordable and grade control may not go very well together.

Affordable for tillage and air drill could be a factory Topcon AGI4 and run it through the console, should be able to find a good one for $2-3K, I have a good one for $2500.

Next step up is someone's CAN Steering system, Trimble, Ag Leader, etc...probably looking between $11-14K for new, depending on options. If you want grade control, pick the system you prefer and start there, likely Trimble for a scraper since I don't believe Ag Leader's Intellislope will handle much on a scraper, but I'm not real up on grade control.

You can likely find a used Trimble FMX with the WM Drain unlocked for reasonable, I actually had a customer ask me about selling his earlier in the week. That would be similar to your CFX-750 you already have

Chris
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)