|
NW Ohio | I am having difficulties calibrating a new vehicle profile with a Trimble 2050 (FMX+ app), NAV3, and a new holland T7070. The Tractor is intellisteer ready and super steer. I found the correct vehicle profile from the vehicle database, and loaded it successfully. I ran through the calibration successfully but the tractor will not follow the line, it zig-zags back and forth from one side of the line to the other. Tractor was working correctly with a NAV2 on an OLD vehicle profile (same vehicle but release 3.0). Attempted the new vehicle profile on the NAV2 with the same results. Where do I start? I messed with the aggressiveness and the approach angles. Had everything turned way down and I could get it to follow the line, but it took a LONG time to get online. I have calibrated ezpilots and EPMD's before with success, but I'm just not sure what I am doing here. NAV is on version 13.75, display is on 11.27. Looking to update vehicle profiles in order to utilize the next-swath feature. Any calibration manuals I can look at? Bad vehicle profile? Steering Gain Settings? I messed with those a bit but not really sure what I was doing or how extreme I can/should go with the numbers....
Thank you!
Edited by k_m_coors 12/12/2024 18:43
| |
|
Calibrating Trimble Auto Pilot
