|
SOIL | That's a good document. Thanks.
So what I'm still curious about is when I pull into a field and turn the display and receiver on, the DigiFarm RTK will pop right up to 100% within seconds, but it won't go to Autonomy Compatible for quite a while because it hasn't pulled in the StarFire signal yet. Bug, is it wanting to make sure my correction is stable or is it wanting some of the SF-RTK signal as well to check against my correction signal?
2nd, a case for different correction sources...I hire a custom operator, and he uses SF-RTK or SF3. That's where the multiple corrections may come in.
Edited by GcDm2010 12/10/2024 10:52
| |
|