| Massey1155 - 11/13/2024 10:29
2510C is not a coulter machine.
They are heavy spring loaded double shank with the knife sandwiched between the two
You will never break a knife bolt.
I've tripped and brought up 3ft pieces of concrete on custom jobs.
Rocks don't bother them.
Nothing to grease but the front coulters and all the knives are on the back. Nothing under the machine.
They make a DMI or CaseIH look like a toy.
Edit- 2510H is the coulter high speed. I wouldn't want one
2510S is the strip till, has the front coulters mounted on a hyd bar and levelers behind the knife
2510C is the conventional till. Knives are spaced so you can also side dress
They don't make the 2510C anymore its the 2430C now only in 19 and 25 row.
I think the reason they quit making that series is because they don't sell enough parts. We run the 'S'. The thing is a tank.
Take care
 (afa08b45-bf84-4ea6-9d32-f3de616479fb (full).jpg)
Attachments
----------------
 afa08b45-bf84-4ea6-9d32-f3de616479fb (full).jpg (139KB - 1 downloads)
|
Is anyone rolling with NH3?
