|
| I have a similar issue to the original post - while harvesting soybeans, when the head is raised to turn around at the end of a pass the yield displays the field avg like it is supposed to. When the head is lowered back down for the next pass, the yield displays a high value (100 bu/ac+) then slowly drops down to the actual yield over about a 10 sec period. Then the yield reads normal until getting to the other end of the field and turning around and starting the next pass. This occurs every time the head is lowered after turning around at the end of a pass, and has done it for multiple seasons and on two different monitors (Insight and Integra). The monitors have had vibration calibrations completed. | |
|
Integra Yield Readout
