|
East Central, Nebraska | actually both, you had suggested previously a kit that would allow me to log via whisker switch which was great but i don't need most the stuff in the fairly expensive kit, I will also need to use a modem. I was going to attempt to make a splitter of sorts and see if i can make a go of it. i know the modem pins, i know the ground pin, i am unsure of the implement switch pin. i found an old pinout diagrom that i am unsure what it is for, either a cfx or fmx that shows pin 11 being the 'dig in/switch'.
so in conclusion the kit you suggested would be a lot of wasted parts that i don't need and also will not get me to where i need to be. was either going to create a splitter or see if i can make an old port replicator work to accomplish what i am needing. thanks | |
|
anyone have a trimble tmx / exp 100 pinout?
